FAQs

Yes. We work with multiple banks. We can get you qualified.

Since 1971. My dad started the business, and I took it over in 1999.

I would say we handle a 60–90-mile radius from our shop.

Yes, everything we do is backed by a 100% warranty.

Yes, we work with multiple banks. We can get most customers financed.

Yes, we offer the best workmanship warranty on the market. A full lifetime warranty that is transferable one time.

We do a 60–75-mile radius from our address.

Weve been in the construction industry since 1971.

Yes, we are both licensed and insured.

Each job is different. But for an average roofing job you’re looking at 1-3 days. Average siding jobs are a little longer., maybe 10 to 14 days.

Let’s say you’re doing Siding, Windows and Soffit and Fascia, that would qualify you for Package Pricing. You would save up to 10-15 %.

We would check and see if you’re lacking insulation and use a thermal gun at the same time.

To start with, is it over 20 years old? Is there shingles missing? Any leaking? Any holes? Is there staining or discoloration on the ceiling inside? Then it’s probably time.

We do both asphalt shingles and metal.

We can use whatever the homeowner wants. But we are certified trough GAF and CertainTeed and can get extended warranties.

If the building is insulated and vented correctly, about 20 to 30 years.

Your roof doesn’t need to start leaking to show it needs replacing. Other problems can cause worrying, resulting in a roof replacement. It is better to replace the roof if there is extensive damage. If you wait too long, you will have to replace sheeting and/or rafters. The cost could double.

Smaller homes would be around 1 to 2 days, while a larger home could take 3 to 5 days.

350$ a square to 1500$ a square.

Yes. We work with multiple banks. We can get you qualified.

Since 1971. My dad started the business, and I took it over in 1999.

I would say we handle a 60–90-mile radius from our shop.

Yes, everything we do is backed by a 100% warranty.

Often, the more windows you install at once, the cheaper the entire project will end up being. If you replace your windows all at once, they will also age at approximately the same rate, and you will be able to save money the next time you need to replace your windows as well.

When it comes to increasing your home’s energy efficiency, you will likely end up saving money on heating and energy bills when you replace your home’s windows. Window replacement is worth the investment if you plan on staying in your home for several years, you have windows that are difficult to open or close or are experiencing temperature variations in the house due to inefficient windows. New windows will be easy to operate, offer better energy performance, and will help regulate the temperature in your house.

It just depends on the size, the type of window, the type of siding, wrapping the window, etc. But in general, a basic window can be replaced in 2 to 3 hours.

Typically, window replacement costs anywhere from $300 to $1800 per window. The price depends on the window frame, the kind of glass it has, the style of the space and the overall labor cost for the replacement.

Seamless Gutters have fewer seams and joints in the gutters and downspouts, which leads to less chance of leaking. The product is stronger than a standard gutter system because it’s not made of multiple parts. This allows it to withstand heavy loads and strong winds.

Needing to replace your gutters can happen for a variety of reasons. Leaky gutters or gutters that hold water can be an issue. Gutters that look or or worn out can make your house look less appealing. Old gutters may not drain properly or may be tearing away from the home. Some old gutters are bent and cannot be repaired, causing clogs and other draining issues. You may desire a new set of gutters to match the style or house color you’re looking for.

6-inch gutters are less likely to get clogged up because they can handle more water flow, and they come with a bigger outlet. If you have a small home with a roof that isn’t very steep, 5” gutters will suffice. Otherwise, go for 6” gutters. The size of your home, the amount of rain your property receives per year, the trees around your home, the materials needed for great performance, the gutter style and gutter color are all factors when choosing which gutter product to use.

Gutter installation takes less than one day in most circumstances but depending on the size and configuration of your building, it can take up to a couple of days.

8$ to 16$. Depending on the size (5 or 6 inch), how many stories and difficulty of the project.

New siding will provide curb appeal, rejuvenate an older home, give it a completely new look, and significantly reduce the cost for home upkeep and maintenance.

Signs of siding that are beginning to go bad include things like fading, chalking, separation at the seams, warping, and moisture appearing on the inside of your home.

Ideally, no; only as much siding as can be replaced in a reasonable amount of time should be removed from your home during the installation process. This way, if the job needs to be continued over several days, your home is not left bare to the elements.

Removing all the old siding is not always necessary when your home is being re-sided. It depends on what has been previously installed, what you are having installed now, and what shape your siding is currently in.

Every house is different, but a typical tear-off and siding installation project may take between 7 to 14 days. There are many things that can extend the time such as the size of your house, if we are installing a decorative siding such as shake and if we are doing any soffit and/or fascia.

$350 a sq to $1500 a square.

Rarely. A good gutter guard should work for many years with zero maintenance. Experts would recommend checking on your gutter cover status every couple years to ensure the effectiveness.

About 20 years. Some manufacturers have warranties from 20 years, such as Champion, all the way to 30+ years.

Possibly. If the gutters are in good standing, you do not need to install new gutters. If this is the case, the existing gutters should be thoroughly cleaned, and all joints should be re-sealed.

No. Gutter guards can prevent more objects than just falling leaves from clogging your gutters.

Like most roofing materials, gutter guards are priced based on how many feet you need. If you are going to have a roofing professional install them for you, you can expect about $6-14 per foot.

Depends on size of job, how many stories, but a basic 150 lf of gutter would be 1 to 3 hours.

Depending on size of job, how many stories, etc. would be 8$ to 16$ a Lnft. Most micromesh guards will be around 11$ to 16$.

Experts estimate that a deck offers a resale value of at least 76%, which is higher than any other home renovation project. So, you can do the math and estimate the increased value of your home.

Yes, we have used both before.

We build with both.

Depends on size, materials, etc. But a basic 10 x 10 deck would take 1 to 3 days.

For a basic treated wood deck, around 30$ to $50 a square foot. A composite deck would be 50$ to 100$ a square foot.

The higher the R-Value, the better the thermal performance of the insulation. We recommend 14 to 16 inches of cellulose which will give you a R-value of approximately 53 for 14 inches and a R-value of approximately 60 for 16 inches.

Loose fill cellulose is ideal for attics in which the joists are irregularly spaced as well as those with many obstructions that you’ll need to work around.

Cellulose insulation is made from recycled paper products, primarily newsprint, and has a very high recycled material content, generally 82% to 85%. The paper is first reduced to small pieces and then fiberized, creating a product that packs tightly into building cavities.

You may want to remove insulation that is damaged or has mold. However, you do not need to remove insulation that’s in good condition.

Smaller homes would be in the 2-to-3-hour range while the larger homes would be in the 5-to-8-hour range.

It depends on R-value (inches), difficulty of attic, quality of cellulose, etc. But it would be around .20$ to .50$ per inch.

Yes. Building codes provide for the use of spray polyurethane insulation.

Not practically. Spray polyurethane application requires complex equipment and a skilled installer with training in the safe and proper installation of the polyurethane system.

A two-part mixture is applied by trained professionals to the surface to be insulated. The spray mixture expands rapidly to fill all cracks and voids, completely and permanently adhering to wood, masonry, metal, concrete, and most other construction materials.

To help reduce outside noise through a wall, either open or closed-cell spray polyurethane foam is a good choice. The most important choice is to use the correct type for your climate zone.

Yes! We can insulation an existing home using dense pack cellulose and/or a PIP retrofit foam

Whether it is professionally applied, or you do it yourself, you might be looking at a few thousand dollars’ worth of expenses for the project to occur. Knowing this information, compare it to your energy bills and estimate any repair or pest control expenses you could potentially be looking at, and add up that amount. If you can break down those investments by month, you are likely to find that with lower bills and lack of needs for most repairs associated with uninsulated walls and attic, what you spend on the spray foam insulation install will quickly be outweighed by the other expenses. Depending on the situation, this may take a different number of months for different people, but it is a safe bet that the upfront expenses will soon pay for themselves.

Spray foam insulation cost is generally broken down by square foot and how many inches being applied. Generally speaking, three inches of open-cell spray foam is typically in the range of $2.50 to $3 per square foot for most residential applications. Three inches is the recommended amount to use for applications like open walls, crawl spaces, and rim joists. Two inches of closed-cell spray foam costs around $3 to $4 per square foot for most existing residential projects.

There are several important considerations you should consider before starting any renovation project. While there are hundreds of different factors pertinent to any type of renovation project, to get you started, we recommend thinking about the following aspects in preparation for your remodel. Whether you're planning a bathroom remodeling project in the Mt. Pleasant area, or a complete home renovation, consider the following aspects:

• Your goals for home remodeling
• Your functionality goals for the space
• Your aesthetic preferences and goals
• The needs and preferences of those in the space
• Your budget for the renovation
• Your expectations for returns on investment (ROI)
• The space you have available.
• Your flexibility regarding time
• Your renovation timeline
• How your remodel will affect the rest of your home

Each remodeling project is unique. During your initial consultation with our design-build team, we will provide you with a timeline for both the design and construction stages of your Mt. Pleasant area home remodeling project.

How Much Should I Budget For Home Remodeling?

The budget for your home remodel largely depends on the type and scope of the project, cost of materials, among additional factors. Each project is unique according to the existing structure, the size of the project, and the wants and needs of each client. One of the smartest ways to create a home renovation budget is to lay out the renovation projects you want to complete and then price them with the help of a professional design-build contractor.

To start with, is it over 20 years old? Is there shingles missing? Any leaking? Any holes? Is there staining or discoloration on the ceiling inside? Then it’s probably time.

We do both asphalt shingles and metal.

We can use whatever the homeowner wants. But we are certified trough GAF and CertainTeed and can get extended warranties.

If the building is insulated and vented correctly, about 20 to 30 years.

Your roof doesn’t need to start leaking to show it needs replacing. Other problems can cause worrying, resulting in a roof replacement. It is better to replace the roof if there is extensive damage. If you wait too long, you will have to replace sheeting and/or rafters. The cost could double.

Smaller homes would be around 1 to 2 days, while a larger home could take 3 to 5 days.

350$ a square to 1500$ a square.

There are several important considerations you should consider before starting any renovation project. While there are hundreds of different factors pertinent to any type of renovation project, to get you started, we recommend thinking about the following aspects in preparation for your remodel. Whether you want to start a bathroom remodel to revamp an outdated layout, or you want to increase your property’s value with a home addition, we can help make your remodeling dream a reality! Contact us today.

• Your goals for home remodeling
• Your functionality goals for the space
• Your aesthetic preferences and goals
• The needs and preferences of those in the space
• Your budget for the renovation
• Your expectations for returns on investment (ROI)
• The space you have available.
• Your flexibility regarding time
• Your renovation timeline
• How your remodel will affect the rest of your home

Each remodeling project is as unique as each client’s vision for their home renovation. During your initial consultation with our design-build team, we will provide you with a timeline for both the design and construction stages and refine and define the details of your project as the process progresses.

The budget for your Alma home remodel largely depends on the type and scope of the project, cost of materials, among additional factors. Each project is unique according to the existing structure, the size of the project, and the wants and needs of each client. One of the smartest ways to create an Alma home renovation budget is to lay out the renovation projects you want to complete and then price them with the help of a professional design-build contractor.

Yes. Building codes provide for the use of spray polyurethane insulation.

Not practically. Spray polyurethane application requires complex equipment and a skilled installer with training in the safe and proper installation of the polyurethane system.

A two-part mixture is applied by trained professionals to the surface to be insulated. The spray mixture expands rapidly to fill all cracks and voids, completely and permanently adhering to wood, masonry, metal, concrete, and most other construction materials.

To help reduce outside noise through a wall, either open or closed-cell spray polyurethane foam is a good choice. The most important choice is to use the correct type for your climate zone.

Yes! We can insulation an existing home using dense pack cellulose and/or a PIP retrofit foam

Whether it is professionally applied, or you do it yourself, you might be looking at a few thousand dollars’ worth of expenses for the project to occur. Knowing this information, compare it to your energy bills and estimate any repair or pest control expenses you could potentially be looking at, and add up that amount. If you can break down those investments by month, you are likely to find that with lower bills and lack of needs for most repairs associated with uninsulated walls and attic, what you spend on the spray foam insulation install will quickly be outweighed by the other expenses. Depending on the situation, this may take a different number of months for different people, but it is a safe bet that the upfront expenses will soon pay for themselves.

Alma spray foam insulation cost is generally broken down by square foot and how many inches being applied. Generally speaking, three inches of open-cell spray foam is typically in the range of $2.50 to $3 per square foot for most residential applications. Three inches is the recommended amount to use for applications like open walls, crawl spaces, and rim joists. Two inches of closed-cell spray foam costs around $3 to $4 per square foot for most existing residential projects.

Experts estimate that a deck offers a resale value of at least 76%, which is higher than any other home renovation project. So, you can do the math and estimate the increased value of your home.

Yes, we have used both before.

We build with both.

Depends on size, materials, etc. But a basic 10 x 10 deck would take 1 to 3 days.

For a basic treated wood deck, around 30$ to $50 a square foot. A composite deck would be 50$ to 100$ a square foot.

New siding will provide curb appeal, rejuvenate an older home, give it a completely new look, and significantly reduce the cost for home upkeep and maintenance.

Signs of siding that are beginning to go bad include things like fading, chalking, separation at the seams, warping, and moisture appearing on the inside of your home.

Ideally, no; only as much siding as can be replaced in a reasonable amount of time should be removed from your home during the installation process. This way, if the job needs to be continued over several days, your home is not left bare to the elements.

Removing all the old siding is not always necessary when your home is being re-sided. It depends on what has been previously installed, what you are having installed now, and what shape your siding is currently in.

Every house is different, but a typical tear-off and Alma siding installation project may take between 7 to 14 days. There are many things that can extend the time such as the size of your house, if we are installing a decorative siding such as shake and if we are doing any soffit and/or fascia.

$350 a sq to $1500 a square.

Seamless Gutters have fewer seams and joints in the gutters and downspouts, which leads to less chance of leaking. The product is stronger than a standard gutter system because it’s not made of multiple parts. This allows it to withstand heavy loads and strong winds.

Needing to replace your gutters can happen for a variety of reasons. Leaky gutters or gutters that hold water can be an issue. Gutters that look or or worn out can make your house look less appealing. Old gutters may not drain properly or may be tearing away from the home. Some old gutters are bent and cannot be repaired, causing clogs and other draining issues. You may desire a new set of gutters to match the style or house color you’re looking for.

6-inch gutters are less likely to get clogged up because they can handle more water flow, and they come with a bigger outlet. If you have a small home with a roof that isn’t very steep, 5” gutters will suffice. Otherwise, go for 6” gutters. The size of your home, the amount of rain your property receives per year, the trees around your home, the materials needed for great performance, the gutter style and gutter color are all factors when choosing which gutter product to use.

Gutter installation in Alma takes less than one day in most circumstances but depending on the size and configuration of your building, it can take up to a couple of days.

To start with, is it over 20 years old? Is there shingles missing? Any leaking? Any holes? Is there staining or discoloration on the ceiling inside? Then it’s probably time.

We do both asphalt shingles and metal.

We can use whatever the homeowner wants. But we are certified trough GAF and CertainTeed and can get extended warranties.

If the building is insulated and vented correctly, about 20 to 30 years.

Your roof doesn’t need to start leaking to show it needs replacing. Other problems can cause worrying, resulting in a roof replacement. It is better to replace the roof if there is extensive damage. If you wait too long, you will have to replace sheeting and/or rafters. The cost could double.

Smaller homes would be around 1 to 2 days, while a larger home could take 3 to 5 days.

350$ a square to 1500$ a square.

To start with, is it over 20 years old? Is there shingles missing? Any leaking? Any holes? Is there staining or discoloration on the ceiling inside? Then it’s probably time.

We do both asphalt shingles and metal.

We can use whatever the homeowner wants. But we are certified trough GAF and CertainTeed and can get extended warranties.

If the building is insulated and vented correctly, about 20 to 30 years.

Your roof doesn’t need to start leaking to show it needs replacing. Other problems can cause worrying, resulting in a roof replacement. It is better to replace the roof if there is extensive damage. If you wait too long, you will have to replace sheeting and/or rafters. The cost could double.

Smaller homes would be around 1 to 2 days, while a larger home could take 3 to 5 days.

350$ a square to 1500$ a square.

Often, the more windows you install at once, the cheaper the entire project will end up being. If you replace your East Lansing windows all at once, they will also age at approximately the same rate, and you will be able to save money the next time you need to replace your windows as well.

When it comes to increasing your home’s energy efficiency, you will likely end up saving money on heating and energy bills when you replace your home’s windows. Window replacement is worth the investment if you plan on staying in your home for several years, you have windows that are difficult to open or close or are experiencing temperature variations in the house due to inefficient windows. New windows will be easy to operate, offer better energy performance, and will help regulate the temperature in your house.

It just depends on the size, the type of window, the type of siding, wrapping the window, etc. But in general, a basic window can be replaced in 2 to 3 hours.

Typically, window replacement costs anywhere from $300 to $1800 per window. The price depends on the window frame, the kind of glass it has, the style of the space and the overall labor cost for the replacement.

Often, the more windows you install at once, the cheaper the entire project will end up being. If you replace your Bay City windows all at once, they will also age at approximately the same rate, and you will be able to save money the next time you need to replace your windows as well.

When it comes to increasing your home’s energy efficiency, you will likely end up saving money on heating and energy bills when you replace your home’s windows. Window replacement is worth the investment if you plan on staying in your home for several years, you have windows that are difficult to open or close or are experiencing temperature variations in the house due to inefficient windows. New windows will be easy to operate, offer better energy performance, and will help regulate the temperature in your house.

It just depends on the size, the type of window, the type of siding, wrapping the window, etc. But in general, a basic window can be replaced in 2 to 3 hours.

Typically, window replacement costs anywhere from $300 to $1800 per window. The price depends on the window frame, the kind of glass it has, the style of the space and the overall labor cost for the replacement.

New siding will provide curb appeal, rejuvenate an older home, give it a completely new look, and significantly reduce the cost for home upkeep and maintenance.

Signs of siding that are beginning to go bad include things like fading, chalking, separation at the seams, warping, and moisture appearing on the inside of your home.

Ideally, no; only as much siding as can be replaced in a reasonable amount of time should be removed from your home during the installation process. This way, if the job needs to be continued over several days, your home is not left bare to the elements.

Removing all the old siding is not always necessary when your home is being re-sided. It depends on what has been previously installed, what you are having installed now, and what shape your siding is currently in.

Every house is different, but a typical tear-off and East Lansing siding installation project may take between 7 to 14 days. There are many things that can extend the time such as the size of your house, if we are installing a decorative siding such as shake and if we are doing any soffit and/or fascia.

$350 a sq to $1500 a square.

New siding will provide curb appeal, rejuvenate an older home, give it a completely new look, and significantly reduce the cost for home upkeep and maintenance.

Signs of siding that are beginning to go bad include things like fading, chalking, separation at the seams, warping, and moisture appearing on the inside of your home.

Ideally, no; only as much siding as can be replaced in a reasonable amount of time should be removed from your home during the installation process. This way, if the job needs to be continued over several days, your home is not left bare to the elements.

Removing all the old siding is not always necessary when your home is being re-sided. It depends on what has been previously installed, what you are having installed now, and what shape your siding is currently in.

Every house is different, but a typical tear-off and Bay City siding installation project may take between 7 to 14 days. There are many things that can extend the time such as the size of your house, if we are installing a decorative siding such as shake and if we are doing any soffit and/or fascia.

$350 a sq to $1500 a square.

Seamless Gutters have fewer seams and joints in the gutters and downspouts, which leads to less chance of leaking. The product is stronger than a standard gutter system because it’s not made of multiple parts. This allows it to withstand heavy loads and strong winds.

Needing to replace your gutters can happen for a variety of reasons. Leaky gutters or gutters that hold water can be an issue. Gutters that look or or worn out can make your house look less appealing. Old gutters may not drain properly or may be tearing away from the home. Some old gutters are bent and cannot be repaired, causing clogs and other draining issues. You may desire a new set of gutters to match the style or house color you’re looking for.

6-inch gutters are less likely to get clogged up because they can handle more water flow, and they come with a bigger outlet. If you have a small home with a roof that isn’t very steep, 5” gutters will suffice. Otherwise, go for 6” gutters. The size of your home, the amount of rain your property receives per year, the trees around your home, the materials needed for great performance, the gutter style and gutter color are all factors when choosing which gutter product to use.

Gutter installation in Bay City takes less than one day in most circumstances but depending on the size and configuration of your building, it can take up to a couple of days.

8$ to 16$. Depending on the size (5 or 6 inch), how many stories and difficulty of the project.

Experts estimate that a deck offers a resale value of at least 76%, which is higher than any other home renovation project. So, you can do the math and estimate the increased value of your home.

Yes, we have used both before.

We build with both.

Depends on size, materials, etc. But a basic 10 x 10 deck would take 1 to 3 days.

For a basic treated wood deck, around 30$ to $50 a square foot. A composite deck would be 50$ to 100$ a square foot.

Yes. Building codes provide for the use of spray polyurethane insulation.

Not practically. Spray polyurethane application requires complex equipment and a skilled installer with training in the safe and proper installation of the polyurethane system.

A two-part mixture is applied by trained professionals to the surface to be insulated. The spray mixture expands rapidly to fill all cracks and voids, completely and permanently adhering to wood, masonry, metal, concrete, and most other construction materials.

To help reduce outside noise through a wall, either open or closed-cell spray polyurethane foam is a good choice. The most important choice is to use the correct type for your climate zone.

Yes! We can insulation an existing home using dense pack cellulose and/or a PIP retrofit foam

Whether it is professionally applied, or you do it yourself, you might be looking at a few thousand dollars’ worth of expenses for the project to occur. Knowing this information, compare it to your energy bills and estimate any repair or pest control expenses you could potentially be looking at, and add up that amount. If you can break down those investments by month, you are likely to find that with lower bills and lack of needs for most repairs associated with uninsulated walls and attic, what you spend on the spray foam insulation install will quickly be outweighed by the other expenses. Depending on the situation, this may take a different number of months for different people, but it is a safe bet that the upfront expenses will soon pay for themselves.

Bay City spray foam insulation cost is generally broken down by square foot and how many inches being applied. Generally speaking, three inches of open-cell spray foam is typically in the range of $2.50 to $3 per square foot for most residential applications. Three inches is the recommended amount to use for applications like open walls, crawl spaces, and rim joists. Two inches of closed-cell spray foam costs around $3 to $4 per square foot for most existing residential projects.

There are several important considerations you should consider before starting any renovation project. While there are hundreds of different factors pertinent to any type of renovation project, to get you started, we recommend thinking about the following aspects in preparation for your remodel. Whether you want to start an Bay City bathroom remodel to revamp an outdated layout, or you want to increase your property’s value with a home addition, we can help make your remodeling dream a reality! Contact us today.

• Your goals for home remodeling
• Your functionality goals for the space
• Your aesthetic preferences and goals
• The needs and preferences of those in the space
• Your budget for the renovation
• Your expectations for returns on investment (ROI)
• The space you have available.
• Your flexibility regarding time
• Your renovation timeline
• How your remodel will affect the rest of your home

Each remodeling project is as unique as each client’s vision for their home renovation. During your initial consultation with our design-build team, we will provide you with a timeline for both the design and construction stages and refine and define the details of your project as the process progresses.

The budget for your Bay City home remodel largely depends on the type and scope of the project, cost of materials, among additional factors. Each project is unique according to the existing structure, the size of the project, and the wants and needs of each client. One of the smartest ways to create a Bay City home renovation budget is to lay out the renovation projects you want to complete and then price them with the help of a professional design-build contractor.

Seamless Gutters have fewer seams and joints in the gutters and downspouts, which leads to less chance of leaking. The product is stronger than a standard gutter system because it’s not made of multiple parts. This allows it to withstand heavy loads and strong winds.

Needing to replace your gutters can happen for a variety of reasons. Leaky gutters or gutters that hold water can be an issue. Gutters that look or or worn out can make your house look less appealing. Old gutters may not drain properly or may be tearing away from the home. Some old gutters are bent and cannot be repaired, causing clogs and other draining issues. You may desire a new set of gutters to match the style or house color you’re looking for.

6-inch gutters are less likely to get clogged up because they can handle more water flow, and they come with a bigger outlet. If you have a small home with a roof that isn’t very steep, 5” gutters will suffice. Otherwise, go for 6” gutters. The size of your home, the amount of rain your property receives per year, the trees around your home, the materials needed for great performance, the gutter style and gutter color are all factors when choosing which gutter product to use.

Gutter installation in East Lansing takes less than one day in most circumstances but depending on the size and configuration of your building, it can take up to a couple of days.

8$ to 16$. Depending on the size (5 or 6 inch), how many stories and difficulty of the project.

Experts estimate that a deck offers a resale value of at least 76%, which is higher than any other home renovation project. So, you can do the math and estimate the increased value of your home.

Yes, we have used both before.

We build with both.

Depends on size, materials, etc. But a basic 10 x 10 deck would take 1 to 3 days.

For a basic treated wood deck, around 30$ to $50 a square foot. A composite deck would be 50$ to 100$ a square foot.

Yes. Building codes provide for the use of spray polyurethane insulation.

Not practically. Spray polyurethane application requires complex equipment and a skilled installer with training in the safe and proper installation of the polyurethane system.

A two-part mixture is applied by trained professionals to the surface to be insulated. The spray mixture expands rapidly to fill all cracks and voids, completely and permanently adhering to wood, masonry, metal, concrete, and most other construction materials.

To help reduce outside noise through a wall, either open or closed-cell spray polyurethane foam is a good choice. The most important choice is to use the correct type for your climate zone.

Yes! We can insulation an existing home using dense pack cellulose and/or a PIP retrofit foam

Whether it is professionally applied, or you do it yourself, you might be looking at a few thousand dollars’ worth of expenses for the project to occur. Knowing this information, compare it to your energy bills and estimate any repair or pest control expenses you could potentially be looking at, and add up that amount. If you can break down those investments by month, you are likely to find that with lower bills and lack of needs for most repairs associated with uninsulated walls and attic, what you spend on the spray foam insulation install will quickly be outweighed by the other expenses. Depending on the situation, this may take a different number of months for different people, but it is a safe bet that the upfront expenses will soon pay for themselves.

East Lansing spray foam insulation cost is generally broken down by square foot and how many inches being applied. Generally speaking, three inches of open-cell spray foam is typically in the range of $2.50 to $3 per square foot for most residential applications. Three inches is the recommended amount to use for applications like open walls, crawl spaces, and rim joists. Two inches of closed-cell spray foam costs around $3 to $4 per square foot for most existing residential projects.

There are several important considerations you should consider before starting any renovation project. While there are hundreds of different factors pertinent to any type of renovation project, to get you started, we recommend thinking about the following aspects in preparation for your remodel. Whether you want to start an East Lansing bathroom remodel to revamp an outdated layout, or you want to increase your property’s value with a home addition, we can help make your remodeling dream a reality! Contact us today.

• Your goals for home remodeling
• Your functionality goals for the space
• Your aesthetic preferences and goals
• The needs and preferences of those in the space
• Your budget for the renovation
• Your expectations for returns on investment (ROI)
• The space you have available.
• Your flexibility regarding time
• Your renovation timeline
• How your remodel will affect the rest of your home

Each remodeling project is as unique as each client’s vision for their home renovation. During your initial consultation with our design-build team, we will provide you with a timeline for both the design and construction stages and refine and define the details of your project as the process progresses.

The budget for your East Lansing home remodel largely depends on the type and scope of the project, cost of materials, among additional factors. Each project is unique according to the existing structure, the size of the project, and the wants and needs of each client. One of the smartest ways to create an East Lansing home renovation budget is to lay out the renovation projects you want to complete and then price them with the help of a professional design-build contractor.

To start with, is it over 20 years old? Is there shingles missing? Any leaking? Any holes? Is there staining or discoloration on the ceiling inside? Then it’s probably time.

We do both asphalt shingles and metal.

We can use whatever the homeowner wants. But we are certified trough GAF and CertainTeed and can get extended warranties.

If the building is insulated and vented correctly, about 20 to 30 years.

If the building is insulated and vented correctly, about 20 to 30 years.

Your roof doesn’t need to start leaking to show it needs replacing. Other problems can cause worrying, resulting in a roof replacement. It is better to replace the roof if there is extensive damage. If you wait too long, you will have to replace sheeting and/or rafters. The cost could double.

Smaller homes would be around 1 to 2 days, while a larger home could take 3 to 5 days.

350$ a square to 1500$ a square.

Often, the more windows you install at once, the cheaper the entire project will end up being. If you replace your Lansing windows all at once, they will also age at approximately the same rate, and you will be able to save money the next time you need to replace your windows as well.

When it comes to increasing your home’s energy efficiency, you will likely end up saving money on heating and energy bills when you replace your home’s windows. Window replacement is worth the investment if you plan on staying in your home for several years, you have windows that are difficult to open or close or are experiencing temperature variations in the house due to inefficient windows. New windows will be easy to operate, offer better energy performance, and will help regulate the temperature in your house.

It just depends on the size, the type of window, the type of siding, wrapping the window, etc. But in general, a basic window can be replaced in 2 to 3 hours.

Typically, window replacement costs anywhere from $300 to $1800 per window. The price depends on the window frame, the kind of glass it has, the style of the space and the overall labor cost for the replacement.

There are several important considerations you should consider before starting any renovation project. While there are hundreds of different factors pertinent to any type of renovation project, to get you started, we recommend thinking about the following aspects in preparation for your remodel. Whether you want to start a Lansing bathroom remodel to revamp an outdated layout, or you want to increase your property’s value with a home addition, we can help make your remodeling dream a reality! Contact us today.

• Your goals for home remodeling
• Your functionality goals for the space
• Your aesthetic preferences and goals
• The needs and preferences of those in the space
• Your budget for the renovation
• Your expectations for returns on investment (ROI)
• The space you have available.
• Your flexibility regarding time
• Your renovation timeline
• How your remodel will affect the rest of your home

Each remodeling project is as unique as each client’s vision for their home renovation. During your initial consultation with our design-build team, we will provide you with a timeline for both the design and construction stages and refine and define the details of your project as the process progresses.

The budget for your Lansing home remodel largely depends on the type and scope of the project, cost of materials, among additional factors. Each project is unique according to the existing structure, the size of the project, and the wants and needs of each client. One of the smartest ways to create an Lansing home renovation budget is to lay out the renovation projects you want to complete and then price them with the help of a professional design-build contractor.

Seamless Gutters have fewer seams and joints in the gutters and downspouts, which leads to less chance of leaking. The product is stronger than a standard gutter system because it’s not made of multiple parts. This allows it to withstand heavy loads and strong winds.

Needing to replace your gutters can happen for a variety of reasons. Leaky gutters or gutters that hold water can be an issue. Gutters that look or or worn out can make your house look less appealing. Old gutters may not drain properly or may be tearing away from the home. Some old gutters are bent and cannot be repaired, causing clogs and other draining issues. You may desire a new set of gutters to match the style or house color you’re looking for.

6-inch gutters are less likely to get clogged up because they can handle more water flow, and they come with a bigger outlet. If you have a small home with a roof that isn’t very steep, 5” gutters will suffice. Otherwise, go for 6” gutters. The size of your home, the amount of rain your property receives per year, the trees around your home, the materials needed for great performance, the gutter style and gutter color are all factors when choosing which gutter product to use.

Gutter installation in Lansing takes less than one day in most circumstances but depending on the size and configuration of your building, it can take up to a couple of days.

8$ to 16$. Depending on the size (5 or 6 inch), how many stories and difficulty of the project.

New siding will provide curb appeal, rejuvenate an older home, give it a completely new look, and significantly reduce the cost for home upkeep and maintenance.

Signs of siding that are beginning to go bad include things like fading, chalking, separation at the seams, warping, and moisture appearing on the inside of your home.

Ideally, no; only as much siding as can be replaced in a reasonable amount of time should be removed from your home during the installation process. This way, if the job needs to be continued over several days, your home is not left bare to the elements.

Removing all the old siding is not always necessary when your home is being re-sided. It depends on what has been previously installed, what you are having installed now, and what shape your siding is currently in.

Every house is different, but a typical tear-off and Lansing siding installation project may take between 7 to 14 days. There are many things that can extend the time such as the size of your house, if we are installing a decorative siding such as shake and if we are doing any soffit and/or fascia.

$350 a sq to $1500 a square.

To start with, is it over 20 years old? Is there shingles missing? Any leaking? Any holes? Is there staining or discoloration on the ceiling inside? Then it’s probably time.

We do both asphalt shingles and metal.

We can use whatever the homeowner wants. But we are certified trough GAF and CertainTeed and can get extended warranties.

If the building is insulated and vented correctly, about 20 to 30 years.

Your roof doesn’t need to start leaking to show it needs replacing. Other problems can cause worrying, resulting in a roof replacement. It is better to replace the roof if there is extensive damage. If you wait too long, you will have to replace sheeting and/or rafters. The cost could double.

Smaller homes would be around 1 to 2 days, while a larger home could take 3 to 5 days.

350$ a square to 1500$ a square.

Often, the more windows you install at once, the cheaper the entire project will end up being. If you replace your Grand Rapids windows all at once, they will also age at approximately the same rate, and you will be able to save money the next time you need to replace your windows as well.

When it comes to increasing your home’s energy efficiency, you will likely end up saving money on heating and energy bills when you replace your home’s windows. Window replacement is worth the investment if you plan on staying in your home for several years, you have windows that are difficult to open or close or are experiencing temperature variations in the house due to inefficient windows. New windows will be easy to operate, offer better energy performance, and will help regulate the temperature in your house.

It just depends on the size, the type of window, the type of siding, wrapping the window, etc. But in general, a basic window can be replaced in 2 to 3 hours.

Typically, window replacement costs anywhere from $300 to $1800 per window. The price depends on the window frame, the kind of glass it has, the style of the space and the overall labor cost for the replacement.

New siding will provide curb appeal, rejuvenate an older home, give it a completely new look, and significantly reduce the cost for home upkeep and maintenance.

Signs of siding that are beginning to go bad include things like fading, chalking, separation at the seams, warping, and moisture appearing on the inside of your home.

Ideally, no; only as much siding as can be replaced in a reasonable amount of time should be removed from your home during the installation process. This way, if the job needs to be continued over several days, your home is not left bare to the elements.

Removing all the old siding is not always necessary when your home is being re-sided. It depends on what has been previously installed, what you are having installed now, and what shape your siding is currently in.

Every house is different, but a typical tear-off and Grand Rapids siding installation project may take between 7 to 14 days. There are many things that can extend the time such as the size of your house, if we are installing a decorative siding such as shake and if we are doing any soffit and/or fascia.

$350 a sq to $1500 a square.

Seamless Gutters have fewer seams and joints in the gutters and downspouts, which leads to less chance of leaking. The product is stronger than a standard gutter system because it’s not made of multiple parts. This allows it to withstand heavy loads and strong winds.

Needing to replace your gutters can happen for a variety of reasons. Leaky gutters or gutters that hold water can be an issue. Gutters that look or or worn out can make your house look less appealing. Old gutters may not drain properly or may be tearing away from the home. Some old gutters are bent and cannot be repaired, causing clogs and other draining issues. You may desire a new set of gutters to match the style or house color you’re looking for.

6-inch gutters are less likely to get clogged up because they can handle more water flow, and they come with a bigger outlet. If you have a small home with a roof that isn’t very steep, 5” gutters will suffice. Otherwise, go for 6” gutters. The size of your home, the amount of rain your property receives per year, the trees around your home, the materials needed for great performance, the gutter style and gutter color are all factors when choosing which gutter product to use.

Gutter installation in Grand Rapids takes less than one day in most circumstances but depending on the size and configuration of your building, it can take up to a couple of days.

8$ to 16$. Depending on the size (5 or 6 inch), how many stories and difficulty of the project.

Experts estimate that a deck offers a resale value of at least 76%, which is higher than any other home renovation project. So, you can do the math and estimate the increased value of your home.

Yes, we have used both before.

We build with both.

Depends on size, materials, etc. But a basic 10 x 10 deck would take 1 to 3 days.

For a basic treated wood deck, around 30$ to $50 a square foot. A composite deck would be 50$ to 100$ a square foot.

Yes. Building codes provide for the use of spray polyurethane insulation.

Not practically. Spray polyurethane application requires complex equipment and a skilled installer with training in the safe and proper installation of the polyurethane system.

A two-part mixture is applied by trained professionals to the surface to be insulated. The spray mixture expands rapidly to fill all cracks and voids, completely and permanently adhering to wood, masonry, metal, concrete, and most other construction materials.

To help reduce outside noise through a wall, either open or closed-cell spray polyurethane foam is a good choice. The most important choice is to use the correct type for your climate zone.

Yes! We can insulation an existing home using dense pack cellulose and/or a PIP retrofit foam

Whether it is professionally applied, or you do it yourself, you might be looking at a few thousand dollars’ worth of expenses for the project to occur. Knowing this information, compare it to your energy bills and estimate any repair or pest control expenses you could potentially be looking at, and add up that amount. If you can break down those investments by month, you are likely to find that with lower bills and lack of needs for most repairs associated with uninsulated walls and attic, what you spend on the spray foam insulation install will quickly be outweighed by the other expenses. Depending on the situation, this may take a different number of months for different people, but it is a safe bet that the upfront expenses will soon pay for themselves.

Grand Rapids spray foam insulation cost is generally broken down by square foot and how many inches being applied. Generally speaking, three inches of open-cell spray foam is typically in the range of $2.50 to $3 per square foot for most residential applications. Three inches is the recommended amount to use for applications like open walls, crawl spaces, and rim joists. Two inches of closed-cell spray foam costs around $3 to $4 per square foot for most existing residential projects.

There are several important considerations you should consider before starting any renovation project. While there are hundreds of different factors pertinent to any type of renovation project, to get you started, we recommend thinking about the following aspects in preparation for your remodel. Whether you want to start a Grand Rapids bathroom remodel to revamp an outdated layout, or you want to increase your property’s value with a home addition, we can help make your remodeling dream a reality! Contact us today.

• Your goals for home remodeling
• Your functionality goals for the space
• Your aesthetic preferences and goals
• The needs and preferences of those in the space
• Your budget for the renovation
• Your expectations for returns on investment (ROI)
• The space you have available.
• Your flexibility regarding time
• Your renovation timeline
• How your remodel will affect the rest of your home

Each remodeling project is as unique as each client’s vision for their home renovation. During your initial consultation with our design-build team, we will provide you with a timeline for both the design and construction stages and refine and define the details of your project as the process progresses.

The budget for your Grand Rapids home remodel largely depends on the type and scope of the project, cost of materials, among additional factors. Each project is unique according to the existing structure, the size of the project, and the wants and needs of each client. One of the smartest ways to create a Grand Rapids home renovation budget is to lay out the renovation projects you want to complete and then price them with the help of a professional design-build contractor.

To start with, is it over 20 years old? Is there shingles missing? Any leaking? Any holes? Is there staining or discoloration on the ceiling inside? Then it’s probably time.

We do both asphalt shingles and metal.

We can use whatever the homeowner wants. But we are certified trough GAF and CertainTeed and can get extended warranties.

If the building is insulated and vented correctly, about 20 to 30 years.

Your roof doesn’t need to start leaking to show it needs replacing. Other problems can cause worrying, resulting in a roof replacement. It is better to replace the roof if there is extensive damage. If you wait too long, you will have to replace sheeting and/or rafters. The cost could double.

Smaller homes would be around 1 to 2 days, while a larger home could take 3 to 5 days.

350$ a square to 1500$ a square.

Often, the more windows you install at once, the cheaper the entire project will end up being. If you replace your windows all at once, they will also age at approximately the same rate, and you will be able to save money the next time you need to replace your Mt. Pleasant windows as well.

When it comes to increasing your home’s energy efficiency, you will likely end up saving money on heating and energy bills when you replace your home’s windows. Mount Pleasant window replacement is worth the investment if you plan on staying in your home for several years, you have windows that are difficult to open or close or are experiencing temperature variations in the house due to inefficient windows. New windows will be easy to operate, offer better energy performance, and will help regulate the temperature in your house.

It just depends on the size, the type of window, the type of siding, wrapping the window, etc. But in general, a basic window can be replaced in 2 to 3 hours.

Typically, window replacement costs anywhere from $300 to $1800 per window. The price depends on the window frame, the kind of glass it has, the style of the space and the overall labor cost for the replacement.

New siding will provide curb appeal, rejuvenate an older home, give it a completely new look, and significantly reduce the cost for home upkeep and maintenance.

Signs of siding that are beginning to go bad include things like fading, chalking, separation at the seams, warping, and moisture appearing on the inside of your home.

Ideally, no; only as much siding as can be replaced in a reasonable amount of time should be removed from your home during the installation process. This way, if the job needs to be continued over several days, your home is not left bare to the elements.

Removing all the old siding is not always necessary when your home is being re-sided. It depends on what has been previously installed, what you are having installed now, and what shape your siding is currently in.

Every house is different, but a typical tear-off and Mt. Pleasant siding installation project may take between 7 to 14 days. There are many things that can extend the time such as the size of your house, if we are installing a decorative siding such as shake and if we are doing any soffit and/or fascia.

$350 a sq to $1500 a square.

Seamless Gutters have fewer seams and joints in the gutters and downspouts, which leads to less chance of leaking. The product is stronger than a standard gutter system because it’s not made of multiple parts. This allows it to withstand heavy loads and strong winds.

Needing to replace your gutters can happen for a variety of reasons. Leaky gutters or gutters that hold water can be an issue. Gutters that look or or worn out can make your house look less appealing. Old gutters may not drain properly or may be tearing away from the home. Some old gutters are bent and cannot be repaired, causing clogs and other draining issues. You may desire a new set of gutters to match the style or house color you’re looking for.

6-inch gutters are less likely to get clogged up because they can handle more water flow, and they come with a bigger outlet. If you have a small home with a roof that isn’t very steep, 5” gutters will suffice. Otherwise, go for 6” gutters. The size of your home, the amount of rain your property receives per year, the trees around your home, the materials needed for great performance, the gutter style and gutter color are all factors when choosing which gutter product to use.

Gutter installation in Mount Pleasant takes less than one day in most circumstances but depending on the size and configuration of your building, it can take up to a couple of days.

8$ to 16$. Depending on the size (5 or 6 inch), how many stories and difficulty of the project.

Experts estimate that a deck offers a resale value of at least 76%, which is higher than any other home renovation project. So, you can do the math and estimate the increased value of your home.

Yes, we have used both before.

We build with both.

Depends on size, materials, etc. But a basic 10 x 10 deck would take 1 to 3 days.

For a basic treated wood deck, around 30$ to $50 a square foot. A composite deck would be 50$ to 100$ a square foot.

Yes. Building codes provide for the use of spray polyurethane insulation.

Not practically. Spray polyurethane application requires complex equipment and a skilled installer with training in the safe and proper installation of the polyurethane system.

A two-part mixture is applied by trained professionals to the surface to be insulated. The spray mixture expands rapidly to fill all cracks and voids, completely and permanently adhering to wood, masonry, metal, concrete, and most other construction materials.

To help reduce outside noise through a wall, either open or closed-cell spray polyurethane foam is a good choice. The most important choice is to use the correct type for your climate zone.

Yes! We can insulation an existing home using dense pack cellulose and/or a PIP retrofit foam

Whether it is professionally applied, or you do it yourself, you might be looking at a few thousand dollars’ worth of expenses for the project to occur. Knowing this information, compare it to your energy bills and estimate any repair or pest control expenses you could potentially be looking at, and add up that amount. If you can break down those investments by month, you are likely to find that with lower bills and lack of needs for most repairs associated with uninsulated walls and attic, what you spend on the spray foam insulation install will quickly be outweighed by the other expenses. Depending on the situation, this may take a different number of months for different people, but it is a safe bet that the upfront expenses will soon pay for themselves.

Mount Pleasant insulation cost is generally broken down by square foot and how many inches being applied. Generally speaking, three inches of open-cell spray foam is typically in the range of $2.50 to $3 per square foot for most residential applications. Three inches is the recommended amount to use for applications like open walls, crawl spaces, and rim joists. Two inches of closed-cell spray foam costs around $3 to $4 per square foot for most existing residential projects.

There are several important considerations you should consider before starting any renovation project. While there are hundreds of different factors pertinent to any type of renovation project, to get you started, we recommend thinking about the following aspects in preparation for your remodel. Whether you want to start an Mount Pleasant bathroom remodel to revamp an outdated layout, or you want to increase your property’s value with a home addition, we can help make your remodeling dream a reality! Contact us today.

• Your goals for home remodeling
• Your functionality goals for the space
• Your aesthetic preferences and goals
• The needs and preferences of those in the space
• Your budget for the renovation
• Your expectations for returns on investment (ROI)
• The space you have available.
• Your flexibility regarding time
• Your renovation timeline
• How your remodel will affect the rest of your home

Each remodeling project is as unique as each client’s vision for their home renovation. During your initial consultation with our design-build team, we will provide you with a timeline for both the design and construction stages and refine and define the details of your project as the process progresses.

The budget for your Mount Pleasant home remodel largely depends on the type and scope of the project, cost of materials, among additional factors. Each project is unique according to the existing structure, the size of the project, and the wants and needs of each client. One of the smartest ways to create a Mount Pleasant home renovation budget is to lay out the renovation projects you want to complete and then price them with the help of a professional design-build contractor.

Experts estimate that a deck offers a resale value of at least 76%, which is higher than any other home renovation project. So, you can do the math and estimate the increased value of your home.

Yes, we have used both before.

We build with both.

Depends on size, materials, etc. But a basic 10 x 10 deck would take 1 to 3 days.

For a basic treated wood deck, around 30$ to $50 a square foot. A composite deck would be 50$ to 100$ a square foot.

Yes. Building codes provide for the use of spray polyurethane insulation.

Not practically. Spray polyurethane application requires complex equipment and a skilled installer with training in the safe and proper installation of the polyurethane system.

A two-part mixture is applied by trained professionals to the surface to be insulated. The spray mixture expands rapidly to fill all cracks and voids, completely and permanently adhering to wood, masonry, metal, concrete, and most other construction materials.

To help reduce outside noise through a wall, either open or closed-cell spray polyurethane foam is a good choice. The most important choice is to use the correct type for your climate zone.

Yes! We can insulation an existing home using dense pack cellulose and/or a PIP retrofit foam

Whether it is professionally applied, or you do it yourself, you might be looking at a few thousand dollars’ worth of expenses for the project to occur. Knowing this information, compare it to your energy bills and estimate any repair or pest control expenses you could potentially be looking at, and add up that amount. If you can break down those investments by month, you are likely to find that with lower bills and lack of needs for most repairs associated with uninsulated walls and attic, what you spend on the spray foam insulation install will quickly be outweighed by the other expenses. Depending on the situation, this may take a different number of months for different people, but it is a safe bet that the upfront expenses will soon pay for themselves.

Lansing spray foam insulation cost is generally broken down by square foot and how many inches being applied. Generally speaking, three inches of open-cell spray foam is typically in the range of $2.50 to $3 per square foot for most residential applications. Three inches is the recommended amount to use for applications like open walls, crawl spaces, and rim joists. Two inches of closed-cell spray foam costs around $3 to $4 per square foot for most existing residential projects.

There are several important considerations you should consider before starting any renovation project. While there are hundreds of different factors pertinent to any type of renovation project, to get you started, we recommend thinking about the following aspects in preparation for your remodel. Whether you want to start an Midland bathroom remodel to revamp an outdated layout, or you want to increase your property’s value with a home addition, we can help make your remodeling dream a reality! Contact us today.

• Your goals for home remodeling
• Your functionality goals for the space
• Your aesthetic preferences and goals
• The needs and preferences of those in the space
• Your budget for the renovation
• Your expectations for returns on investment (ROI)
• The space you have available.
• Your flexibility regarding time
• Your renovation timeline
• How your remodel will affect the rest of your home

Each remodeling project is as unique as each client’s vision for their home renovation. During your initial consultation with our design-build team, we will provide you with a timeline for both the design and construction stages and refine and define the details of your project as the process progresses.

The budget for your Midland home remodel largely depends on the type and scope of the project, cost of materials, among additional factors. Each project is unique according to the existing structure, the size of the project, and the wants and needs of each client. One of the smartest ways to create a Midland home renovation budget is to lay out the renovation projects you want to complete and then price them with the help of a professional design-build contractor.

Yes. Building codes provide for the use of spray polyurethane insulation.

Not practically. Spray polyurethane application requires complex equipment and a skilled installer with training in the safe and proper installation of the polyurethane system.

A two-part mixture is applied by trained professionals to the surface to be insulated. The spray mixture expands rapidly to fill all cracks and voids, completely and permanently adhering to wood, masonry, metal, concrete, and most other construction materials.

To help reduce outside noise through a wall, either open or closed-cell spray polyurethane foam is a good choice. The most important choice is to use the correct type for your climate zone.

Yes! We can insulation an existing home using dense pack cellulose and/or a PIP retrofit foam

Whether it is professionally applied, or you do it yourself, you might be looking at a few thousand dollars’ worth of expenses for the project to occur. Knowing this information, compare it to your energy bills and estimate any repair or pest control expenses you could potentially be looking at, and add up that amount. If you can break down those investments by month, you are likely to find that with lower bills and lack of needs for most repairs associated with uninsulated walls and attic, what you spend on the spray foam insulation install will quickly be outweighed by the other expenses. Depending on the situation, this may take a different number of months for different people, but it is a safe bet that the upfront expenses will soon pay for themselves.

Midland spray foam insulation cost is generally broken down by square foot and how many inches being applied. Generally speaking, three inches of open-cell spray foam is typically in the range of $2.50 to $3 per square foot for most residential applications. Three inches is the recommended amount to use for applications like open walls, crawl spaces, and rim joists. Two inches of closed-cell spray foam costs around $3 to $4 per square foot for most existing residential projects.

Experts estimate that a deck offers a resale value of at least 76%, which is higher than any other home renovation project. So, you can do the math and estimate the increased value of your home.

Yes, we have used both before.

We build with both.

Depends on size, materials, etc. But a basic 10 x 10 deck would take 1 to 3 days.

For a basic treated wood deck, around 30$ to $50 a square foot. A composite deck would be 50$ to 100$ a square foot.

To start with, is it over 20 years old? Is there shingles missing? Any leaking? Any holes? Is there staining or discoloration on the ceiling inside? Then it’s probably time.

We do both asphalt shingles and metal.

We can use whatever the homeowner wants. But we are certified trough GAF and CertainTeed and can get extended warranties.

If the building is insulated and vented correctly, about 20 to 30 years.

Your roof doesn’t need to start leaking to show it needs replacing. Other problems can cause worrying, resulting in a roof replacement. It is better to replace the roof if there is extensive damage. If you wait too long, you will have to replace sheeting and/or rafters. The cost could double.

Smaller homes would be around 1 to 2 days, while a larger home could take 3 to 5 days.

350$ a square to 1500$ a square.

Often, the more windows you install at once, the cheaper the entire project will end up being. If you replace your windows all at once, they will also age at approximately the same rate, and you will be able to save money the next time you need to replace your Saginaw windows as well.

When it comes to increasing your home’s energy efficiency, you will likely end up saving money on heating and energy bills when you replace your home’s windows. Saginaw window replacement is worth the investment if you plan on staying in your home for several years, you have windows that are difficult to open or close or are experiencing temperature variations in the house due to inefficient windows. New windows will be easy to operate, offer better energy performance, and will help regulate the temperature in your house.

It just depends on the size, the type of window, the type of siding, wrapping the window, etc. But in general, a basic window can be replaced in 2 to 3 hours.

Typically, window replacement costs anywhere from $300 to $1800 per window. The price depends on the window frame, the kind of glass it has, the style of the space and the overall labor cost for the replacement.

New siding will provide curb appeal, rejuvenate an older home, give it a completely new look, and significantly reduce the cost for home upkeep and maintenance.

Signs of siding that are beginning to go bad include things like fading, chalking, separation at the seams, warping, and moisture appearing on the inside of your home.

Ideally, no; only as much siding as can be replaced in a reasonable amount of time should be removed from your home during the installation process. This way, if the job needs to be continued over several days, your home is not left bare to the elements.

Removing all the old siding is not always necessary when your home is being re-sided. It depends on what has been previously installed, what you are having installed now, and what shape your siding is currently in.

Every house is different, but a typical tear-off and Saginaw siding installation project may take between 7 to 14 days. There are many things that can extend the time such as the size of your house, if we are installing a decorative siding such as shake and if we are doing any soffit and/or fascia.

$350 a sq to $1500 a square.

Seamless Gutters have fewer seams and joints in the gutters and downspouts, which leads to less chance of leaking. The product is stronger than a standard gutter system because it’s not made of multiple parts. This allows it to withstand heavy loads and strong winds.

Needing to replace your gutters can happen for a variety of reasons. Leaky gutters or gutters that hold water can be an issue. Gutters that look or or worn out can make your house look less appealing. Old gutters may not drain properly or may be tearing away from the home. Some old gutters are bent and cannot be repaired, causing clogs and other draining issues. You may desire a new set of gutters to match the style or house color you’re looking for.

6-inch gutters are less likely to get clogged up because they can handle more water flow, and they come with a bigger outlet. If you have a small home with a roof that isn’t very steep, 5” gutters will suffice. Otherwise, go for 6” gutters. The size of your home, the amount of rain your property receives per year, the trees around your home, the materials needed for great performance, the gutter style and gutter color are all factors when choosing which gutter product to use.

Gutter installation in Saginaw takes less than one day in most circumstances but depending on the size and configuration of your building, it can take up to a couple of days.

8$ to 16$. Depending on the size (5 or 6 inch), how many stories and difficulty of the project.

Experts estimate that a deck offers a resale value of at least 76%, which is higher than any other home renovation project. So, you can do the math and estimate the increased value of your home.

Yes, we have used both before.

We build with both.

Depends on size, materials, etc. But a basic 10 x 10 deck would take 1 to 3 days.

For a basic treated wood deck, around 30$ to $50 a square foot. A composite deck would be 50$ to 100$ a square foot.

Yes. Building codes provide for the use of spray polyurethane insulation.

Not practically. Spray polyurethane application requires complex equipment and a skilled installer with training in the safe and proper installation of the polyurethane system.

A two-part mixture is applied by trained professionals to the surface to be insulated. The spray mixture expands rapidly to fill all cracks and voids, completely and permanently adhering to wood, masonry, metal, concrete, and most other construction materials.

To help reduce outside noise through a wall, either open or closed-cell spray polyurethane foam is a good choice. The most important choice is to use the correct type for your climate zone.

Yes! We can insulation an existing home using dense pack cellulose and/or a PIP retrofit foam

Whether it is professionally applied, or you do it yourself, you might be looking at a few thousand dollars’ worth of expenses for the project to occur. Knowing this information, compare it to your energy bills and estimate any repair or pest control expenses you could potentially be looking at, and add up that amount. If you can break down those investments by month, you are likely to find that with lower bills and lack of needs for most repairs associated with uninsulated walls and attic, what you spend on the spray foam insulation install will quickly be outweighed by the other expenses. Depending on the situation, this may take a different number of months for different people, but it is a safe bet that the upfront expenses will soon pay for themselves.

Saginaw spray foam insulation cost is generally broken down by square foot and how many inches being applied. Generally speaking, three inches of open-cell spray foam is typically in the range of $2.50 to $3 per square foot for most residential applications. Three inches is the recommended amount to use for applications like open walls, crawl spaces, and rim joists. Two inches of closed-cell spray foam costs around $3 to $4 per square foot for most existing residential projects.

There are several important considerations you should consider before starting any renovation project. While there are hundreds of different factors pertinent to any type of renovation project, to get you started, we recommend thinking about the following aspects in preparation for your remodel. Whether you want to start a Saginaw bathroom remodel to revamp an outdated layout, or you want to increase your property’s value with a home addition, we can help make your remodeling dream a reality! Contact us today.

• Your goals for home remodeling
• Your functionality goals for the space
• Your aesthetic preferences and goals
• The needs and preferences of those in the space
• Your budget for the renovation
• Your expectations for returns on investment (ROI)
• The space you have available.
• Your flexibility regarding time
• Your renovation timeline
• How your remodel will affect the rest of your home

Each remodeling project is as unique as each client’s vision for their home renovation. During your initial consultation with our design-build team, we will provide you with a timeline for both the design and construction stages and refine and define the details of your project as the process progresses.

The budget for your Saginaw home remodel largely depends on the type and scope of the project, cost of materials, among additional factors. Each project is unique according to the existing structure, the size of the project, and the wants and needs of each client. One of the smartest ways to create an Saginaw home renovation budget is to lay out the renovation projects you want to complete and then price them with the help of a professional design-build contractor.

To start with, is it over 20 years old? Is there shingles missing? Any leaking? Any holes? Is there staining or discoloration on the ceiling inside? Then it’s probably time.

We do both asphalt shingles and metal.

We can use whatever the homeowner wants. But we are certified trough GAF and CertainTeed and can get extended warranties.

If the building is insulated and vented correctly, about 20 to 30 years.

Your roof doesn’t need to start leaking to show it needs replacing. Other problems can cause worrying, resulting in a roof replacement. It is better to replace the roof if there is extensive damage. If you wait too long, you will have to replace sheeting and/or rafters. The cost could double.

Smaller homes would be around 1 to 2 days, while a larger home could take 3 to 5 days.

350$ a square to 1500$ a square.

Often, the more windows you install at once, the cheaper the entire project will end up being. If you replace your windows all at once, they will also age at approximately the same rate, and you will be able to save money the next time you need to replace your Midland windows as well.

When it comes to increasing your home’s energy efficiency, you will likely end up saving money on heating and energy bills when you replace your home’s windows. Midland window replacement is worth the investment if you plan on staying in your home for several years, you have windows that are difficult to open or close or are experiencing temperature variations in the house due to inefficient windows. New windows will be easy to operate, offer better energy performance, and will help regulate the temperature in your house.

It just depends on the size, the type of window, the type of siding, wrapping the window, etc. But in general, a basic window can be replaced in 2 to 3 hours.

Typically, window replacement costs anywhere from $300 to $1800 per window. The price depends on the window frame, the kind of glass it has, the style of the space and the overall labor cost for the replacement.

New siding will provide curb appeal, rejuvenate an older home, give it a completely new look, and significantly reduce the cost for home upkeep and maintenance.

Signs of siding that are beginning to go bad include things like fading, chalking, separation at the seams, warping, and moisture appearing on the inside of your home.

Ideally, no; only as much siding as can be replaced in a reasonable amount of time should be removed from your home during the installation process. This way, if the job needs to be continued over several days, your home is not left bare to the elements.

Removing all the old siding is not always necessary when your home is being re-sided. It depends on what has been previously installed, what you are having installed now, and what shape your siding is currently in.

Every house is different, but a typical tear-off and Midland siding installation project may take between 7 to 14 days. There are many things that can extend the time such as the size of your house, if we are installing a decorative siding such as shake and if we are doing any soffit and/or fascia.

$350 a sq to $1500 a square.

Seamless Gutters have fewer seams and joints in the gutters and downspouts, which leads to less chance of leaking. The product is stronger than a standard gutter system because it’s not made of multiple parts. This allows it to withstand heavy loads and strong winds.

Needing to replace your gutters can happen for a variety of reasons. Leaky gutters or gutters that hold water can be an issue. Gutters that look or or worn out can make your house look less appealing. Old gutters may not drain properly or may be tearing away from the home. Some old gutters are bent and cannot be repaired, causing clogs and other draining issues. You may desire a new set of gutters to match the style or house color you’re looking for.

6-inch gutters are less likely to get clogged up because they can handle more water flow, and they come with a bigger outlet. If you have a small home with a roof that isn’t very steep, 5” gutters will suffice. Otherwise, go for 6” gutters. The size of your home, the amount of rain your property receives per year, the trees around your home, the materials needed for great performance, the gutter style and gutter color are all factors when choosing which gutter product to use.

Gutter installation in Midland takes less than one day in most circumstances but depending on the size and configuration of your building, it can take up to a couple of days.

8$ to 16$. Depending on the size (5 or 6 inch), how many stories and difficulty of the project.

The Energy Plus Home Improvement Design Studio is a hands-on tool that shows your ideas on a 3D model of your actual home. You can check out various design layouts and pick exact colors and materials for your walls, roof, trim, and windows. This helps you see how Energy Plus upgrades will look before you commit.

After you send photos of your house to the Energy Plus Design Studio app, you'll get a clear 3D model of your home within a day. This quick turnaround lets you start planning your Energy Plus improvements right away. 

With just eight photos, our Energy Plus Design Studio can build an accurate 3D model of your home (we'll guide you on which shots to take). For even better results, feel free to add more photos of your property. The more images you provide, the more detailed your Energy Plus home model will be.

It's completely free! Energy Plus Home Improvement offers this Design Studio tool at no cost to help you plan your home upgrades.